4 Use the operation buttons | Usingi process |
|
Description of the function of the buttons
1 Preparation before washing Usingi process
Mode and meaning of the indicator
the frame of the indicator is on : indicate the program about to run, or indicate the selected mode
Attention
During the machine works,all buttons except 
LEVEL
button and 
START/PAUSE
button unselect.
During the machine works,opening the top lid the machine will give a beep alarm.
Digital tube
During sensing, it displays
During operation of programs, it displays the remained time (minute) or remained times of the corresponding procedure
The digital tube corresponding to the running program lights.
Preparation before washing
1.Connect the water inlet hose. Open the water faucet.
2.Confirm that the washing machine is earthed reliably. Then insert the power plug into the receptacle. The earth terminal shall not link to gas pipeline and faucet water pipeline.
3.Put down the drain hose.
MINUTES MINUTES TIMES MINUTES
Pay attention to the followings before washing
|
|
|
| nano wash |
Digital tub display |
|
|
|
|
10 water level selection |
|
|
|
|
12 mins quick wash |
|
|
|
|
Sup e r - p owe r digi t a l intel l ig ent contr o l |
|
|
|
|
SOAK | WASH | RINSE | SPIN | + |
|
Check if the laundries has special requi- rement on w- ashing
Clear the pocket. Take out the coi- ns, sand, hairpins etc.
Tie the long strips; fasten the buttons; close zippers.
The quantity of the laundries shall not be too large. Stretch and loosen the laundries before putting them in the tub.
When the pulsator is running, the but- tons of the laundri- es may cause noi- se. For the sake of discretion, please put the laundries with buttons into other laundries.
SOAK button
Push the SOAK button to set the soak procedure.
During standard and blanket programs, push the SOAK button to set different soak time (10,20,30 or 40 minutes) During cotton programs, push
the SOAK button to select soak procedure, but the soak time can not be changed. During otherd programs, push the SOAK button, the machine have no reaction.
WASH button
Push the WASH button to set the wash procedure. During standard and blanket programs, push the WASH button to set different wash time (from 0 to 25 minutes) During cotton woollen and silk programs, push the WASH button to select wash procedure, but the wash time can not be changed.
During otherprograms, push the WASHbutton, the machine have no reaction.
RINSE button
Push the RINSE button to set the rinse procedure.
During standard and blanket programs, push the RINSE button to set different rinse times ( 0, 1,1., 2,2., 3,3., 4,4. Times), when display (1.,2.,3.,4.),the first rinse is overflowing.
During cotton woollen and silk programs, push the RINSE button to select rinse procedure, but the rinse times can not be changed.
During other programs,push the RINSE button, the machinehave no reaction.
SPIN button
Push the SPIN Button to set the spin
During standard and blanket
programs, push the SPINbutton to setdifferent spin time (from 0 to 9 minutes)
During cotton, woollen and silk programs, push the SPIN button to select spin procedure, but the spin time can not be Changed.
During the other program, push the SPIN button, the machine have no reaction
a. Check if the laundries are applicable for washing with machine. b. Divide the laundries that are not colorfast from other laundries. c. Put those laundries difficult to absorb water into water with hand.
d. For those laundries with heavy soil, please first remove the dirt like mud or dust. For the parts with heavy soil, please apply detergent on them in advance, which can make it easier to remove the soil.
e. For those laundries that may get lint ball and those with long fur, turn it over before putting in.
f. Do not put those laundries polluted by chemicals into the washing machine directly.
10
7