Connection between the water inlet hose and the washing machine
1.Do not take off the water absorption cushion. Please check if the cushion is dropped or damaged before each usage. If it happens please contact our
2.Put the nut of the water inlet hose on the valve jointer.
Nut of the water inlet hose
Water absorption cushion
Jointer of the water inlet valve
3.Fasten the nut. Swing it gently to confirm if it’s suitable.
The new
Connection between the jointer of the water inlet hose and the water inlet hose
1.Push down the slider. Insert the water inlet hose into
the jointer. | Jointer of the water |
2. Hang the lock lever to the jointer. | inlet hose |
Locking lever | |
Release the slider till a click sound is heard. | Slider |
|
Check the connection between the jointer of the water inlet hose and the water faucet
1. Swing the hose gently to confirm if it is fastened stable.
2.After installation, open the tap to check if it leaks.
3. Do not bend the hose with overstrain.
4. Before each usage please check if the connection between the jointer of the water inlet hose and the
water tap, and the installation of the water inlet hose
are firm, so as to prevent dropping from improper Installation position.
Dismantle the water inlet hose
1.Close the water faucet.
Locking lever
2. Press the locking lever. Push down the slider. Then pull off the water inlet hose. If the machine is used more than once every week, the jointer of the water inlet hose can be kept on the tap to prevent damaging the fixing screw.
Slider
10