Haier HWM80-928NZP user manual Reserve Water button, Air Dry button, Delay button, LCD screen

Page 15

H “Reserve Water” button

Press “Reserve Water” button to keep rinsing water;

When Reserve Water mode is selected, the washing machine will keep rinsing water after each rinsing with buzz and voice indications (for example, if 2nd rinsing is selected, then 2nd rinsing water will be kept; if 1st rinsing and 2nd rinsing) are selected at the same time, then 1st and 2nd rinsing water will be both kept).

During waiting minutes, drainage function could be activated if open and close cover once or press start/pause key, buzz will prompt every 15 minutes within 4 hours, if no operation within 4 hours during waiting, it will drain water directly after one buzz, and then turn to next process.

I “Air Dry” button

Press “Air Dry” button to set drying time (in minute), including 30,60,90,120 and 180 min in turn;

It is suggested that dry time below 60 min is suitable to internal and external barrel, so as to prevent mildew.

This product could dry 1.5kg synthetic clothes in once at most (clothes suits to iron after dry). Dry degree will be varied with different clothing. Clothes shall be loosing before dry.

The dry mode couldn’t be selected for program of “Night Washing”, “Wool”, or “blanket”.

J “DELAY” button

Press the button to select the reserve time (2h-24h).

Press the button can display the reserve state.

K LCD screen

It displays program detected.

It displays remained reserve time (hour).

It displays abnormal symbol in abnormal situation.

Steps of using the operation buttons and description of each step

1. Push “Power” button to switch on the power

It has the special power resume function. In the case of power failure or the power plug is loose during running , the machine can save the running program, and resume the program after the power supply is recovered. You do not need to set the program again.

2. Push “Program” button to select suitable full-auto program

After the power is switched on, “Standard” is automatically set. To select other full-auto programs, please push the “Program” button till the corresponding indicator is on. Refer to the “Program” button on Page 13.

When a standard cycle is selected, the fuzzy program is run. The water level and the washing time can be selected according to be texture and volume of the laundry. The washing cycle is automatically controlled.

15

Image 15
Contents User’s manual Contents Names of the parts Meaning and description of the symbolsSafety precautions Machine Installation and adjustment Install the inner cover componentInstall the bottom plate Usage of the drain hose Adjust the installation positionHWM70-928NZP How to change the direction of the drain hoseConfirm the water faucet Install the water inlet hoseDismantle the water inlet hose Preparation before washing Pay attention to followings before washing the laundriesPreparation before washing Usage of the detergent How to use the whitenerHow to use the softener Put in the laundriesChild lock function Indicator mode and meaningPower button Use the operation buttonsSpeed button SoakWash,Rinse,Spin buttonWater Level button QuickStrong buttonAir Dry button Delay buttonPush Power button to switch on the power Reserve Water buttonPush the Start/Pause button Push the Water Level button, select suitable water levelDisposal after washing Common phenomena Trouble-shooting answer to questionPacking list SpecificationsName Quantity Storage position
Related manuals
Manual 20 pages 52.33 Kb