Disposal after washing

●After using, please clean the lint and foreign materials of the lint ﬁlter etc. in time. Otherwise it may inﬂuence your using the machine.

●Please ﬁrst pull off the power plug from the receptacle before cleaning.

Clean the detergent box and set it on the control panel seat.

1. The method of dismantle: Push it up aslant and gently.

2.The method of install : install it upwards and

aslant and push it in .

Dismantle Install

●The lint ﬁlter must be used during washing.

●It must be cleaned in time after each using.

	Back cover	Up
	of lint ﬁlter	Up
	Up
	Dismantle	Install
Install	Dismantle	Install
Install	Dismantle
	Down	Front cover
	Down	Front cover
	Down	of lint ﬁlter
Figure 1	Figure 2

Lint ﬁlter:

1.Push down the spring piece of the top lint ﬁlter to make the claws out of the ﬁlter cover, and then pull out the lint ﬁlter to get it down. (ﬁgure1)

2.Pull the back of the lint ﬁlter, and then you can get down it off the front cover of the lint ﬁlter. (ﬁgure2)

3.Sweep the rubbish in the lint ﬁlter.

4.Put the back of the lint ﬁlter into the front cover.

5.Put the lint ﬁlter into ﬁlter cover, and make it tight.

6.Make sure the lint ﬁlter well installed, or it can inﬂuence your use.

The ﬁlter screen of the water inlet valve is likely to be blocked by foreign materials and inﬂuence the water inlet. Please clean it with brush every two months.

If the cabinet is dirty, wipe it with wet cloth

●Do not ﬂush it directly with water.

●Wipe it with neutral detergent.

●Do not wipe it with thinner, petrol, alcohol etc.

Petrol

Alcohol

Thinn	er

1.After washing, close the water faucet. (If needed, you can dismantle the water inlet hose).

2.Do not store water in the washing machine for a long period. Drain the water completely after each using.

3.Be sure to pull off the power plug before maintenance.

4.Hang up the power cord and drain hose.

5.Wipe off the water drops on the surface of the machine and inside the tub. Open the top lid for some time (about 1 hour), then close the top lid.