Usingi process
Child lock function
This function is used to protect the children and prevent them from changing the washing procedure.
Push and hold the WATER LEVEL button and SPIN button, then push down the POWER ON/OFF button. The digitron displays CL . You can continue setting desired washing procedures. After setting, push down the START/PAUSE button. The child lock function is activated.All of the buttons are locked and cannot make selection. Release the child lock function: push down the WATER LEVEL and SPIN button at
the same time for more than 1 second. After a beep sound, the child lock function is released.
Power On/Off button
Push the POWER ON/OFF button to switch on the power. When the power is on, push it again to switch off the power. 
Push the POWER ON/OFF button to switch on the power. If the START/PAUSE button is not pushed, the washing machine will automatically switch off the power after 5 minutes.
Reserve/remain time indicator digitron
During sensing, it displays 
During reserve procedure, it displays the remained reserve time (in hour)
During operation of programs, it displays the remained time (minute). If the remained time exceeds 99 minutes,
it adopts A at tens place to represent 100 minutes, b to represent 110 minutes. For instance, A3 represents 103 minutes. In case of abnormal phenomenon, it displays the abnormal symbol (see to Page 16)
9 | 10 |
7 | 8 |
5 | 6 |
3 | 4 |
1 | 2 |
Time remained(minutes) | FIBRE |
| |
| COTTON |
Reserve(hours later) | WOOLLEN |
|
SILK
NORMAL
QUICK
POSTHASTE
JEANS
START
POWER
WATER | PROGRAM |
RESERVE | |
LEVEL |
|
ON/OFF
PAUSE
Start/Pause button
After the power is switched on, push it to Start the machine
WATER LEVEL button
The washing machine can detect the laundries automatically. After detection, it will set the water level to suitable value among 4, 6, 8,and 10 automatically.
You can also set water level by self. After the machine
is started, it will not set water level automatically. You shall push the START/PAUSE button to make new setting.
If there's water inside the tub, the machine cannot detect the laundries and will display water level 6 .
If wet laundries are put in, it may display water level 10 . You must set suitable water level by yourself.
If POSTHASTE program is selected, it will display water level 3 . When water level 2 is reached in water filling, it will perform washing while filling water. When water level 3 is reached, it will change to normal washing.
During operation of wash and rinse program, you can push down the water level button to add water. When you release the button, or it reaches the overflow water level, the machine will stop adding water. The water level decided may be different from actual value because of the different moisture level of the laundries.
RERSERVE button
In normal operation mode, the reserve indicator light is off. The time remain indicator light is on. The digitron displays the time remained (in minute) before the washing is finished.
Push down the RESERVE button. The reserve indicator light is on ,The digitron displays the reserve time of finishing washing (in hour).When the machine is started, the reserve indicator light is on, indicating that the reserve function is running.
During working, push it to pause working.
During pause, push it to resume working.
PROGRAM selection button
Following automatic programs are available for selection
Program | Applicable situation |
|
|
|
|
Normal | Common washing |
|
Quick | Quick and |
|
| common laundries |
|
Posthaste | Super quick wash of the laundry |
|
| under 1 kg with light soil |
|
|
|
|
Jeans | Washing the relatively big and thick laundriesr |
|
|
|
|
Fibre | Washing the chimical fiber laundries |
|
|
|
|
Cotton | Washing the cotton textiles |
|
Woollen | Washing the woolen textiles |
|
Silk | Washing the textile |
|