Safety precautions | Before using |
Please install and adjust the machine according to the requirement of the manual, which is very important for you to operate the machine safely and properly.
Install the lint filter
Insert the bottom of the lint filter
(marked with 
down side 
) into the filter frame, then push the
upper part of the filter in ( marked with 
up side 
).(See to Figure )
Install the bottom plate
After opening the package, please lean the washing machine gently down on soft items (like towel cloth, blanket, etc.). Install the bottom plate to the bottom of the machine with one screw by a cross screwdriver, then lift the machine up gently. See to the figure:
Adjust the installation position
The largest allowable slope of the shank base of the machine is 2 
. The slanting or rough 
ground will result in unstable running or 
stoppage of the machine. Please adjust it with 
following methods:
Adjust the adjustable leg:
1.To twist the adjustable leg, please first lift up the leg side slightly, loosen the adjustable nut, and then twist the leg.
2.After adjustment, fasten the nut.
Adjustable nut
Loosen 
Fasten
High 
Low
Adjustable leg
3