Haier XQB50-10A Close the top lid, Press the water level button to select suitable water level

Page 16

Using process

Total time: including the normal water inlet time, drain time, excluding the power off time. The total washing time may be influenced by the water inlet pressure and water level.

Spin time: the time from intermittent running to finishing.

The Jeans program could combine the process of soak during which the washing machine firstly soak for about 25~45 min after water filling and then begins to wash.

When "Quick wash" program is chosen, the washing machine would automatically set water level and full processes of wash, rinse and spin.

3 Press the "water level" button to select suitable water level

WATER LEVEL

After switching on the power, press the button "Water level" to select a water level according to the load. Please refer to the paragraphs Detergent standard dosages and water levels" and "Button of Water level" on page 9.

Page 9

4 Push the "Reservation" button to select suitable reserve program

PROGRAM RESERVATION

After switching on, the washing machine reserved wash program will be automatically set inactive. If you desire a wash cycle to end at a reserved time, you can press the "Reservation" button to set a reserved wash program. Refer to "The button of Reservation" on page 9.

Confirm the reserve program

Page 9

 

When "Reservation" becomes active, the nixie tube displays the time to the end of the reserved wash cycle, and the indicator turns on.

To change the running program or cancel the reservation, you should cut off the supply and reselect.

the washing will finish about 18 hours later

5 Press the "start/pause" button

5 Close the top lid

When the machine working, if the top cover is opened, the washing machine will stop running and alarm.

START PAUSE

Image 16
Contents Automatic Washing Machine Contents Before Using Names of the partsSafety precautions Do not use water hotter above 50 CPetrol Install the bottom plate Installation and adjustmentAdjust the installation position Before Using Install the water inlet hose Before using Take down the water inlet hosePreparation before washing Using process Using process Put in the laundriesHow to use the whitener How to use the washing powderPut in the detergent Standard usage quantity of the detergent and water quantityUse the operation buttons Using process Power ON/OFFbutton Operating procedure and explanations for the buttons Press the Power On/Off button to switch on the power supplySelection method of the procedure programs Press the water level button to select suitable water level Close the top lidPress the start/pause button Finish washing Disposal after washingTrouble shooting Answer to question Packing list Common phenomenaSpecification Model