Haier XQB50-10A user manual Trouble shooting Answer to question

Trouble shooting Answer to question

(If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special maintenance department . Do not repair it by yourself.

Phenomena		The reason	How to settle
Buzzing upon reservation starts,
Nixie tube indicates "E0"		The top lid is not closed	Close the top lid
No or slow drain, nixie tube		Is the drain hose put down?	Put down the drain hose. Open
			and close the top lid once.
indicates "E1" , buzzing.		Is the drain hose blocked by	Clean the foreign material.
		foreign material?
			Open and close the top lid once.
Running pauses during spin,		The top cover leaves open	Close the top lid
nixie tube indicates "E2”,
buzzing
Safety switch actuates, not		Are the laundries put slantingly?	Re-order the laundries. Close
spin, (after self-correction		Is the machine slanting?	the top lid.
twice), nixie tube displays			Level the machine in right
			position. Open and close the
"E3", buzzing
			top lid once.
No or slow water filling (not		The water tap is not open	Open the water tap. Push the
			"Start/Pause" button.
reaching the level in 15 min),
		The water inlet valve is blocked	Clean the water inlet valve.
nixie tube indicates "E4",
		The water pressure is too low	Push the "Start/Pause" button.
buzzing			Wait for the normal water
		and the current is too small
			pressure before use.
		Is there power failure?	Use it when the power is on.
	Not wash	Is the power plug loose?	Insert the power plug tightly.
		Does the water level arrive at the	Affusion to the set water level.
The machine does
		set water level?
not act
		Is the power plug loose?	Insert the power plug tightly.
	Not spin	Is the top lid closed?	Close the top lid
		Are the laundries put orderly?	Put the laundries orderly.
		Is the machine slanting?	Level the machine properly.
There's abnormal sound		Is there metal material inside	Fasten the buttons and zipper
inside the machine.
		the washing machine?	Reorder the laundries. Close the
		Are the laundries slanting in
			top lid.
		spinning?
No water filling		Is the power plug loose?	Insert the plug firmly
		If the water faucet is turned on?	Turn on the water faucet
		If Power On/Off and	Press Power On/Off and
		Start/Pause are pressed?	Start/Pause
The machine does not act.		Is there power failure?	Use it when the power is on.
(the indicators are off.)		Is the power plug loose?	Insert the power plug tightly.