Haier XQB70-10 user manual Safety precautions

Page 3

Safety precautions

Before Using

Please insert the power cord into special rece- ptacle with rated voltage.If the power cord is three-phase wire,please use three-phase rec- eptacle.The earthing terminal of the receptacle must be earthed reliably.If it is two-phase wire, please guarantee that the earthing wire is ear- thed reliably.If possible ,please adopt electric leakage protector.

The power cord plug should be convenient to be pluged in or pluged out with hand while the washing machine runs normally. Be sure to pull the plug out and close the water tap when the machine is idle,when moving the machine,or when cleaning the machine.Do not use wet hand to ins- ert or pull out the power plug.

Do not damage the power cord,bend ,extend,twist,bind or alter it by force.Do not press or nip it with weight.If the power cord or the power plug is bad, or the power plug becomes flexible,to avoid risk it is required to have it replaced by the technicians of our special shop or the after-sale service department. Keep the pin of the power plug clean,if the power plug is polluted with dust,please wipe with dry cloth carefully.

Image 3
Contents XQB70-10 Names of the parts Safety precautions Etrol Special functions Usage of the drain hose How to change the direction of the drain hoseInstall the water inlet hose Take down the water inlet hose Preparation before washing Using process Put in the laundries Using process How to use the whitener How to use the washing powderStandard usage quantity of the detergent and water quantity Use the operation buttons Using process Start/Pausebutton Press the Power On/Off button to switch on the power supply Operating procedure and explanations for the buttonsPress the water level button to select suitable water level Selection method of the procedure programsPush the Reservation button to select Suitable reserve programPress the start/pause button Close the top lid Trouble shooting Answer to question Phenomena Explanation Common phenomenaSpecification