|
|
|
|
|
|
| Using process | |
|
| Time list of each program (minute) |
|
|
| |||
|
|
|
|
|
|
|
|
|
| Program | Water | Wash | Rinse | Spin | Total time(min) |
| |
| level | (min) | (min) | (min) |
| |||
|
|
|
|
| ||||
|
|
|
|
|
|
|
| |
| Standard | 1~10 |
| Rinse twice,each about 4 | About 6 | About 35~47 |
| |
|
|
|
|
|
|
|
| |
| Jeans | 1~10 |
| Rinse twice, each abut 4 | About 5.5~6.5 | About 35~48 |
| |
|
|
|
|
|
|
|
| |
| Gentle | About 4 | About 3 | Rinse once, about 4 | About 2 | About 10 |
| |
| Quick | 1~10 | About 3 | Rinse twice, about 4 | About 2 | About 24 |
| |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
Total time: including the normal water inlet time, drain time, excluding the power off time. The total washing time may be influenced by the water inlet pressure and water level.
Spin time: the time from intermittent running to finishing.
The Standard or Jeans program could combine the process of soak during which the washing machine firstly soak for about 15~45 min after water filling and then begins to wash.
When "Quick wash" program is chosen, the washing machine would automatically set water level and full processes of wash, rinse and spin.
5 Push the "Reservation" button to select | Reserve | |
| suitable reserve program | |
|
| |
|
|
|
After switching on, the washing machine reserved wash program will be automatically set inactive. If you desire a wash cycle to end at a reserved time, you can press the "Reservation" button to set a reserved wash program. Refer to "The button of Reservation" on page 11.
Confirm the reserve program
When "Reservation" becomes active, the nixie tube displays the time to the end of the reserved wash cycle, and the indicator turns on.
To change the running program or cancel the reservation, you should cut off the supply and reselect.
the washing will finish about 18 hours later
6 Press the "start/pause" button
5 Close the top lid
Except water filling and draining, if the top cover is opened, the washing machine will stop running and alarm.
6 Finish washing
The washing machine cuts off the power supply 
automatically when wash cycle ends.
Start
Pause
After Finishing wash alarm automatically