Haier XQB70-10 user manual Special functions

Page 5

Special functions

Before Using

"Hand scrub" wash:

The drum and pulsator rotate in opposite directions to form a washing water flow similar to hand scrubbing movement, and meanwhile the drum inner wall also take a share in washing, which obviously increase the washing intensity.

Open-cover alarm function

During washing cycle except the processes of water filling and draining, the washing machine will stop operation and automatically alarm if the top cover is opened.

Installation and adjustment

Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine.

Install the bottom plate

After you open the package, please lean the washing machine gently down on soft items ( like the towel cloth, blanket, etc. ). Install the bottom plate to the bottom of the machine with the eight screws by a cross screwdriver, then lift the machine up gently. See to the figure:

Back

Front

Soft items

Screw

Bottom plate

Adjust the installation position

The largest allowed slope of the shank base of the machine is 2 . The slanting or rough ground will result in unstable running or stoppage of the machine. Please adjust it with following methods:

Adjust the adjustable foot:

1.To twist the adjustable foot, please first lift up the side of the foot slightly, loosen the adjustable nut, and twist the foot.

2.Fasten the nut after adjustment.

adjustable nut

Loosen Fasten

adjustable foot

High Low

Image 5
Contents XQB70-10 Names of the parts Safety precautions Etrol Special functions Usage of the drain hose How to change the direction of the drain hoseInstall the water inlet hose Take down the water inlet hose Preparation before washing Using process Put in the laundries Using process Standard usage quantity of the detergent and water quantity How to use the whitenerHow to use the washing powder Use the operation buttons Using process Start/Pausebutton Press the Power On/Off button to switch on the power supply Operating procedure and explanations for the buttonsPress the water level button to select suitable water level Selection method of the procedure programsPress the start/pause button Push the Reservation button to selectSuitable reserve program Close the top lid Trouble shooting Answer to question Phenomena Explanation Common phenomenaSpecification