Haier WMS650 user manual Preparation before washing Using process

Preparation before washing Using process

Preparation before washing 1.Connect the water inlet hose.

2.Confirm that the washing machine is earthed reliably . Then insert the power plug into the receptacle. Do not connect the earth terminal to the gas pipe and tap water pipe.

3.Put down the drain hose.

4.Slanting or uneven ground may result in unstable working or abnormal noise. Please make the machine stand horizontally.

Pay attention to followings before washing the laundries

Check		if	C l e a r	t h e
the laundries			pocket.	Take
has	special		out the coins,
requirement			sand, hairpins
on	washing		etc.

Tie	the long	The quantity of		When the pulsator
strips; fasten		the laundries		is running ,			the
the	buttons;	shall not be too		buttons		of	the
close zippers.		large.	Stretch	l a u n d r i e s m a y
		and loosen the		cause		noise. For
		laundries before		t h e	s a k e		o f
		putting	them in	discretion, please
		the tub.		put	the laundries
				with buttons			into
				other		laundries.

a. Check if the laundries are applicable for washing with machine. b. Divide the laundries that are not colorfast from other laundries. c. Put those laundries difficult to absorb water into water with hand.

d. For those laundries with heavy soil, please first remove the dirt like mud or dust. For the parts with heavy soil, please apply detergent on them in advance, which can make it easier to remove the soil.

e. For those laundries that may get lint ball and those with long fur, turn it over before putting in.

f. Do not put those laundries polluted by chemicals into the washing machine directly.