Haier XPB70-113S user manual Washing sequence

	Washing sequence							Water-filling selector handle
							Overfilling sign
Wash timer		Wash selector			Water-filling entrance		Buzzer
								Spin timer
(To set to below 2 minute,		(Strong current,				(The buzzer will ring when		(to set to below 1 minute,
first set to 5 minute then		standard current)				the	washing finishes)	first set to 2 minute then
turn it back. it can increase								turn it back. it can increase
the service life of the timer).								the service life of the timer).
	OFF		STRONG		OFF					OFF
		STANDARD
				DRAIN	MAX
					BUZZER
WASH TIMER		WASH SELECTOR							SPIN TIMER

Wash

1.Water-filling selector	WASH	SPIN
(1) Set the water-filling selector at the "WASH" side.
(Figure 1)			Figure 1
(2) Set the water level adjusting lever to needed line.
2. Fill the water and add the dissolved washing
powder to make the water level reach the preset
position. (Figure 2)
Run washing program for some time to stir and			Figure 2
dissolve the powder completely.
	STRONG
	STANDARD
3.Put in the laundries. If the water quantity is			DRAIN
insufficient, please add water.
WASH SELECTOR			Figure 3

4.Select the current.

Select the strength of the current according to the laundries. (Figure 3)

5.Select the washing time

Select the washing time according to the laundries. (Figure 4)

OFF

WASH TIMER

Figure 4

6.After washing, the buzzer will ring. Set the "WASH SELECTOR" at "DRAIN". (Figure 5).

STRONG

STANDARD

DRAIN

WASH SELECTOR

Figure 5

8