How to change the direction of the drain hoses

How to change the direction of the drain hoses

	Figure 1 indicates the ex factory
	installation position of the drain	Figure 1
	hose.	Figure 1
	hose.

Extend the drain hose from the side of spin tub.

Side sectional view

Drain hose	Fixing hook
fixing hook	installation hole
Pull outwards		Drain hose
slightly
slightly

Take off

the drain hose

Take off the drain hose from the hanging hole of the cabinet. Pull the drain hose fixing hook outwards gently to take out the drain hose from the two fixing hooks. (As per Figure 2)

Rotate the drain hose fixing hook for 90 to take it out from the installation hole (As per Figure 3).

Install the two drain hose fixing hooks taken out into the installation hole at the other side of the base frame (to aim at the installation hole accurately you can lean the washing machine forward slightly).Then rotate for 90 (As per Figure 4).

Pull the fixing hook outwards slightly. Inlay the drain hose into the fixing hooks reliably along the groove at spin tub side, and make it extend towards spin tub side.

Drain hose	Figure 2
fixing hook

Rotate the fixing	Rotate the fixing
hook for 90	hook for 90
	to fix it
Take off the fixing	Insert the fixing hook into the
hook downwards	Insert the fixing hook into the
	installation hole upwards
Figure 3	Figure 4

Figure 5

Figure 6

Extend the drain hose from the rear side

Take out the drain hose from the fixing hook. Extend it from the rear side (When the drain hose is extended from the rear side, it can be hung on the point for drain hose at the two sides of the cabinet.) (See to Figure 6).

		Quick water-filling entrance

If	you do not need spraying spin, you can Quick water-filling entrance
fill		water into the wash tub directly through

this entrance. It can reduce the humidity inside the control panel significantly and prolong the operating life of the components.