Using the SmartDispense pedestal, SmartDispense system

GE SPBD880 Using the SmartDispense pedestal, To Fill Your Detergent Tank, SmartDispense system

Using the SmartDispense™ pedestal.

ge.com

Safety

The SmartDispense™ Pedestal automatically dispenses liquid HE (High Efficiency) detergent and/or concentrated liquid fabric softener into each cycle based on load size, soil level and water hardness.

To utilize the SmartDispense Detergent Dispenser, it must first be filled. Although any liquid HE (High Efficiency) laundry detergent and concentrated liquid fabric softener can be used in the SmartDispense system, all liquid HE (High Efficiency) detergents and concentrated liquid fabric softeners are not the same.

Do not mix any liquid HE (High Efficiency) detergents of unlike brands, concentrations or scents within the detergent tanks, as this could cause the detergents to congeal and lead to blockage of the SmartDispense system. Do not mix any concentrated liquid fabric softeners of unlike brands or scents within the fabric softener tank. Do not mix any liquid HE (High Efficiency) detergents with concentrated liquid fabric softeners in any of the tanks. Remove and wash tanks thoroughly before using a different brand, concentration or scent of liquids.

CAUTION! Absolutely do not store liquid chlorine bleach, powder detergent, non-HE (High Efficiency) liquid detergent, nonconcentrated liquid fabric softener or other laundry additives in any of the three tanks. Use only liquid HE (High Efficiency) detergent, which has been specifically designed for use in front-load washers.

To open the SmartDispense™ Pedestal for filling, slide

open the pedestal drawer to the maximum possible distance. Open the instruction panel by pressing the tabs at the sides of the panel, rotate the panel toward you and slide it down in the slot available.

NOTE: The first time your washer recognizes that the SmartDispense system has been activated, it will automatically fill the supply lines with detergent and/or fabric softener for all active tanks. This process will last approximately two minutes and will only occur at the beginning of the first cycle that uses

the SmartDispense system.

Instructions Operating Instructions

Detergent tanks

0:48

LEFT Detergent LOW

0:48

LEFT Detergent EMPTY

To Fill Your Detergent Tank:

1.Select which of the two outer tanks you wish to fill. Open the tank for filling by turning the cap counterclockwise until the cap is loose. Lift the cap off.

NOTE: Do not fill the tank while it is removed from the drawer. Fluid may be lost while reattaching the tank to the SmartDispense system.

2.Aim the detergent bottle at the opening in the tank and begin to fill. Each detergent tank will hold 350 oz. of liquid HE (High Efficiency) detergent (the largest available detergent bottle is 300 oz.). The system requires that at least 50 ounces of new detergent must be added to the tank

to recognize that it has been filled.

3.When full, replace the cap and turn clockwise until tight to ensure proper sealing. If residue is left on the tank, wipe clean with a moist cloth, using a mild soap.

4.An indicator will appear on the washer control panel to notify you when the dispenser needs to be filled again. After filling the tank, the warning message will turn off when the washer is powered on for the next cycle. A full tank using regular concentrated detergent

will last approximately 3 months for the average user.

Instructions

Installation

Troubleshooting Tips Consumer Support

SPBD880 specifications

The GE SPBD880 is an innovative and advanced circuit breaker designed to meet the demands of modern electrical systems. With a strong focus on safety, reliability, and efficiency, this model stands out in the market.

One of the main features of the SPBD880 is its ability to provide exceptional protection against overload and short-circuit conditions. This is essential in preventing damage to electrical equipment and ensuring the safety of personnel. The SPBD880 employs thermal-magnetic trip units, which combine both thermal and magnetic operating principles. This dual functionality allows for precise control and rapid response to abnormal conditions, enhancing the overall safety of the electrical system.

In addition to its robust protection mechanisms, the SPBD880 is designed for ease of use and installation. With a compact design, the breaker can fit into tight spaces, making it suitable for various applications, including industrial and commercial environments. The intuitive mounting system simplifies the installation process, reducing labor costs and installation time.

The SPBD880 also features advanced communication capabilities. It is equipped with integrated metering and monitoring technologies, allowing for real-time data collection on energy usage and system performance. This data can be invaluable for predictive maintenance practices and optimizing energy consumption, leading to reduced operational costs.

Another notable characteristic of the SPBD880 is its adaptability. It can be configured to accommodate varying system requirements, ensuring that it meets specific application needs. Whether in a standalone setup or part of a larger automated electrical system, the SPBD880 can seamlessly integrate with other devices to enhance functionality.

The environmentally friendly design of the GE SPBD880 ensures minimal impact during manufacturing and implementation. With a focus on sustainability, it utilizes materials and technologies that reduce the overall carbon footprint.

In summary, the GE SPBD880 circuit breaker combines advanced safety features, ease of use, and adaptability, making it an excellent choice for modern electrical installations. Its innovative design not only enhances protection but also promotes efficiency and sustainability, positioning it as a vital component in both industrial and commercial settings. As electrical systems evolve, the SPBD880 offers the reliability and performance needed to keep pace with technological advancements.