General settings PSM, Basic procedure

General settings — PSM

You can change PSM (Preferred Setting Mode) items listed on the table that follows.

2Select a PSM item.

3Adjust the PSM item selected.

4Repeat steps 2 and 3 to adjust the other PSM items if necessary.

5Finish the procedure.

Ex.: When you select “AMP GAIN”

Indications	Selectable settings, [reference page]
DEMO	DEMO ON	: [Initial]; Display demonstration will be activated
Display demonstration		automatically if no operation is done for about
		20 seconds, [7].
	DEMO OFF : Cancels.

CLOCK H	1 – 12, [7]
Hour adjustment	[Initial: 1 (1:00)]

CLOCK M	00 – 59, [7]
Minute adjustment	[Initial: 00 (1:00)]

AMP GAIN	You can change the maximum volume level of this unit.
Amplifier gain control	LOW PWR	: VOL 00 – VOL 30 (Select this if the maximum
		power of the speaker is less than 50 W to avoid
		damaging the speaker.)
	HIGH PWR	: [Initial]; VOL 00 – VOL 50

AREA	AREA EU	: Select this when using the unit in an area other than
Tuner channel interval		North and South America. (FM: 50 kHz—manual
		tuning, 100 kHz—auto search; AM: 9 kHz)
	AREA US	: [Initial]; Select this when using the unit in North or
		South America. (FM: 200 kHz; AM: 10 kHz)