JVC KD-S12 manual Specifications, Audio Amplifier Section

Page 17

Specifications

AUDIO AMPLIFIER SECTION

Power Output:

18 W RMS × 4 Channels at 4 and 1% THD+N

Signal to Noise Ratio:

80 dBA (reference: 1 W into 4 )

CD PLAYER SECTION

Type: Compact disc player

Signal Detection System: Non-contact optical pickup (semiconductor laser)

Number of channels: 2 channels (stereo)

Frequency Response: 5 Hz to 20 000 Hz

Dynamic Range: 96 dB

Signal-to-Noise Ratio: 98 dB

Wow and Flutter: Less than measurable limit

ENGLISH

Load Impedance: 4 (4 to 8 allowance) Tone Control Range:

Bass: ±10 dB at 100 Hz

Treble: ±10 dB at 10 kHz Frequency Response: 40 Hz to 20 000 Hz Line-Out Level/Impedance:

2.0V/20 kload (full scale) Output Impedance: 1 k

TUNER SECTION

Frequency Range:

FM: 87.5 MHz to 107.9 MHz

(with channel interval set to 200 kHz) 87.5 MHz to 108.0 MHz

(with channel interval set to 50 kHz) AM: 530 kHz to 1 710 kHz

(with channel interval set to 10 kHz) 531 kHz to 1 602 kHz

(with channel interval set to 9 kHz)

[FM Tuner]

Usable Sensitivity: 11.3 dBf (1.0 µV/75 )

50 dB Quieting Sensitivity:

16.3 dBf (1.8 µV/75 )

Alternate Channel Selectivity (400 kHz): 65 dB

Frequency Response: 40 Hz to 15 000 Hz

Stereo Separation: 35 dB

Capture Ratio: 1.5 dB

[AM Tuner]

Sensitivity: 20 µV

Selectivity: 35 dB

GENERAL

Power Requirement: Operating Voltage:

DC 14.4 V (11 V to 16 V allowance) Grounding System: Negative ground Allowable Operating Temperature:

0°C to +40°C (32°F to 104°F) Dimensions (W × H × D):

Installation Size (approx.):

182 mm × 52 mm × 150 mm (7-3/16" × 2-1/16" × 5-15/16")

Panel Size (approx.):

188 mm × 58 mm × 11 mm (7-7/16" × 2-5/16" × 7/16")

Mass (approx.):

1.4 kg (3.1 lbs) (excluding accessories)

Design and specifications are subject to change without notice.

If a kit is necessary for your car, consult your telephone directory for the nearest car audio speciality shop.

17

Image 17
Contents KD-S12 CD Receiver Receptor CON CDInformation For U.S.A How to forcibly eject a discHow to reset your unit Contents How to detach/attach the control panel How to read this manualHow to use the Mode button Display window Control panel KD-S12Parts identification Getting started To turn off the powerTo activate the display demonstration Canceling the display DemonstrationsSetting the clock FM station automatic presetting When an FM stereo broadcast is hard to receiveRadio operations SSM Strong-station Sequential MemoryManual presetting Listening to a preset stationProhibiting disc ejection Disc operationsTo stop play and eject the disc To check the current clock time while listening to a discMode Mode Plays at randomSelecting the playback modes Adjusting the sound Sound adjustmentsFor Preset values Indication RangeBasic procedure General settings PSMMaintenance More about this unit General settings-PSMSymptoms Remedies/Causes TroubleshootingAudio Amplifier Section SpecificationsCall Refer to page of How to reset your unitRemoving the unit Parts list for installation and connectionTypical Connections Connecting the external amplifierPrecautions on power supply and speaker connections