LG Electronics D3788W, D5988B, D5988W manual Custom Programming Beeper, To store a Custom

Part 8 OPERATING YOUR DRYER

11. Custom Programming 12. Beeper

Set up your favorite combination of settings and save them here for one-touch recall.

To store a CUSTOM

PROGRAM.

1.Select a cycle

2.Change DRY LEVEL and TEMP. CONTROL.

3.Select OPTIONS you want.

4.Press and hold the CUSTOM PROGRAM.

To recall your stored CUSTOM PROGRAM

Press CUSTOM PROGRAM button, then press

START/PAUSE.

Maintenance

The BEEPER controls the volume of the beep that is made when you press any of the buttons on the control panel and the termination of any cycle is indicated.

Press BEEPER to adjust the sound level or turn off the signal.

Clean lint filter

Clean the lint filter after each use and check it before use. Not cleaning or emptying the filter will increase drying time and energy consumption, therefore dryer life expectancy could be shortened after all.

■Clean the door and its opening

1. Wipe out the door opening. Otherwises, build-ups of dirts and foreign objects will damage sealing of door.

2.Clean the transparent glass door to keep

inside view clear througth the glass.

1.Open the door and pull the filter straight up

2.Clean the filter using one of following ways in cases.

Run the fingers across the filter

Vaccum the lint filter

Wash the lint screen in warm,soapy water.

Dry thoroughly and replace.

2 8