Door Reversal, Replacement parts | Frigidaire 137153400A specification

Door Reversal

Your dryer is designed so the door swing may be reversed at any time without additional parts. Conversion is accomplished by transferring hinges to the opposite side of the cabinet.

To change the direction of the door opening:

1.Open the dryer door. Remove the four hinge hole plugs from the left side of the door opening. Place nearby for future installation.

You may need a plastic knife to help pull out the plugs. Be careful not to scratch the paint.

2.Remove the four screws that secure the door hinges to the dryer front panel (see below).

3.Rotate the door 180° and reinstall the door hinges to the dryer front panel with the four screws.

4.Install the four hinge hole plugs in the open screw holes on the opposite side of the door opening.

Replacement parts:

If replacements parts are needed for your dryer, contact the source where you purchased your dryer.

- ELECTRICAL SHOCK HAZARD - Label all wires prior to disconnection when servicing controls. Wiring errors can cause improper and dangerous operation. Verify proper operation after servicing.

Accessories

Failure to use accessories manufactured by (or approved by) the manufacturer could result in personal injury, property damage or damage to the dryer.

LP CONVERSION KIT

P/N PCK2003

Gas dryers intended for use in a location supplied with LP must use a conversion kit prior to installation.

MOBILE HOME INSTALLATION KIT

P/N 137067200

Installations in mobile homes require use of MOBILE HOME INSTALLATION KIT.

DRYING RACK

Depending on the model you purchased, a drying rack may have been included in the initial purchase of your dryer.

If your model did not include a drying rack or you desire another drying rack, you may order one from your local parts distributor.

DIRECTIONAL VENTING KIT

P/N 131456800

Order this kit to utilize the side venting option of the dryer. Additional hardware available from your local hardware store will be necessary.

TOUCH UP PAINT PENS

White Touch Up Pen - P/N 5303321319

Bisque Touch Up Bottle - P/N 5304414035

Black Touch Up Pen - P/N 5304458932

UNDER-COUNTER INSTALLATION KIT (front console model only)

For under-counter installation, top panel must be removed and kit number 131629100 must be installed.

DRYER STACKING KIT (front console model only)

P/N 5303937141

Depending on the model you purchased, a kit for stacking this dryer on top of matching washer may have been included in the initial purchase of your dryer. If your model did not include a stacking kit or you desire another stacking kit, you may order one.

15 INCH (38 cm) PEDESTAL (front console model only)

A pedestal accessory, speciﬁcally designed for this dryer may be used to elevate the dryer for ease of use. This pedestal will add about 15” (38 cm) to the height of your unit for a total height of 51.25” (130 cm). Contact the location where you purchased your dryer.

137153400A specifications

The Frigidaire 137153400A is a highly functional part designed for a range of Frigidaire washing machines, catering to diverse household laundry needs. This part is an essential component that contributes to the seamless operation of washing appliances, ensuring user satisfaction through durability and efficient performance.

One of the main features of the Frigidaire 137153400A is its robust design that includes high-quality materials. This durability ensures that it withstands regular usage, thus minimizing the need for frequent replacements. The precise engineering of the part guarantees that it fits perfectly into compatible washing machine models, which streamlines the installation process and helps maintain optimal washing results.

In terms of technology, this component excels in enhancing the overall efficiency of washing machines. Its role is crucial in regulating water flow and performing necessary operations that enhance water drainage and cycle completion. This functionality not only improves washing performance but also reduces water waste, aligning with modern environmental standards.

Another characteristic of the Frigidaire 137153400A is its compatibility with a variety of Frigidaire washing machine models. This versatility makes it a valuable addition for homeowners who may want to upgrade or replace parts in their existing appliances without downgrading performance. Homeowners can benefit from the cost savings associated with keeping their current washing machines in optimal working condition rather than investing in new units.

In summary, the Frigidaire 137153400A is a well-engineered component that offers a blend of durability, efficiency, and compatibility with Frigidaire washing machines. Its design not only supports improved washing performance but also minimizes environmental impact through better water management. For those seeking to maintain their appliances effectively, this part stands as an indispensable choice that underscores Frigidaire's commitment to quality and technological advancement in household appliances. Investing in components like the Frigidaire 137153400A ensures that laundry tasks can be completed with ease and reliability, meeting the demands of a modern household.