Manufactured or mobile home installation

Exhaust system requirements, continued

In installations where the exhaust system is not described in the charts, the following method must be used to determine if the exhaust system is acceptable:

1.Connect an inclined or digital manometer between the dryer and the point the exhaust connects to the dryer.

2.Set the dryer timer and temperature to air ﬂuff (cool down) and start the dryer.

3.Read the measurement on the manometer.

4.The system back pressure MUST NOT be higher than

0.75 inches of water column. If the system back pressure is less than 0.75 inches of water column, the system is acceptable. If the manometer reading is higher than .075 inches of water column, the system is too restrictive and the installation is unacceptable.

Exhaust direction

All dryers shipped from the factory are set up for rear exhausting. However, on electric dryers, exhausting can be to the right or left side of the cabinet or the bottom of the dryer. On gas dryers, exhausting can be to the right side of the cabinet or the bottom of the dryer. Directional exhausting can be accomplished by installing Exhaust Kit, P/N 131456800, available through your parts distributor. Follow the instructions supplied with the kit.

Although vertical orientation of the exhaust system is acceptable, certain extenuating circumstances could affect the performance of the dryer:

•Only the rigid metal duct work should be used.

•Venting vertically through a roof may expose the exhaust system to down drafts causing an increase in vent restriction.

•Running the exhaust system through an uninsulated area may cause condensation and faster accumulation of lint.

•Compression or crimping of the exhaust system will cause an increase in vent restriction.

•The exhaust system should be inspected and cleaned a minimum of every 18 months with normal usage. The more the dryer is used, the more often you should check the exhaust system and vent hood for proper operation.

131/2” (34 cm)

43/8” (11 cm)

3 3/4”

(9.5 cm)

3 3/4”

(9.5 cm)

43/8” (11 cm)

5 7/8”		3 3/4”

		(9.5 cm)
(15 cm)

13 1/2”

(34 cm)

Manufactured or mobile home installation

1.Installation MUST conform to current Manufactured Home Construction & Safety Standard, Title 24 CFR, Part 32-80 (formerly the Federal Standard for Mobile Home Construction and Safety, Title 24, HUD Part 280) or Standard CAN/CSAZ240 MH.

2.Dryer MUST be exhausted outside (outdoors, not beneath the mobile home) using metal ducting that will not support combustion. Metal ducting must be 4 inches (10.16 cm) in diameter with no obstructions. Rigid metal duct is preferred.

3.If dryer is exhausted through the ﬂoor and area beneath the mobile home is enclosed, the exhaust system MUST

terminate outside the enclosure with the termination securely fastened to the mobile home structure.

4.Refer to previous sections in this guide for other important exhaust venting system requirements.

5.When installing a gas dryer into a mobile home, a provision must be made for outside make up air. This provision is to be not less than twice the area of the dryer exhaust outlet.

6.Installer MUST anchor this (1) dryer or (2) dryer mounted on pedestal to the ﬂoor with approved Mobile Home Installation Kit - P/N 137067200.

137153400A specifications

The Frigidaire 137153400A is a highly functional part designed for a range of Frigidaire washing machines, catering to diverse household laundry needs. This part is an essential component that contributes to the seamless operation of washing appliances, ensuring user satisfaction through durability and efficient performance.

One of the main features of the Frigidaire 137153400A is its robust design that includes high-quality materials. This durability ensures that it withstands regular usage, thus minimizing the need for frequent replacements. The precise engineering of the part guarantees that it fits perfectly into compatible washing machine models, which streamlines the installation process and helps maintain optimal washing results.

In terms of technology, this component excels in enhancing the overall efficiency of washing machines. Its role is crucial in regulating water flow and performing necessary operations that enhance water drainage and cycle completion. This functionality not only improves washing performance but also reduces water waste, aligning with modern environmental standards.

Another characteristic of the Frigidaire 137153400A is its compatibility with a variety of Frigidaire washing machine models. This versatility makes it a valuable addition for homeowners who may want to upgrade or replace parts in their existing appliances without downgrading performance. Homeowners can benefit from the cost savings associated with keeping their current washing machines in optimal working condition rather than investing in new units.

In summary, the Frigidaire 137153400A is a well-engineered component that offers a blend of durability, efficiency, and compatibility with Frigidaire washing machines. Its design not only supports improved washing performance but also minimizes environmental impact through better water management. For those seeking to maintain their appliances effectively, this part stands as an indispensable choice that underscores Frigidaire's commitment to quality and technological advancement in household appliances. Investing in components like the Frigidaire 137153400A ensures that laundry tasks can be completed with ease and reliability, meeting the demands of a modern household.