GE JBP30, JBP26 Using the oven controls, Customer Service Troubleshooting Tips Care and Cleaning

Operating Instructions Safety Instructions

Using the oven controls.

Throughout this manual, features and appearance may vary from your model.

Oven Control, Clock and Timer Features and Settings

On some models, opening the oven door will not automatically turn the oven light on. You may use the oven light switch to turn the light on and off.

Customer Service Troubleshooting Tips Care and Cleaning

COOK TIME ON/OFF Pad

Press this pad and then press the HOUR and MIN. pads to set the amount of time you want your food to cook. Turn the Oven Temperature knob to the desired temperature. The oven will shut off when the Cook Time has run out.

TIMER ON/OFF Pad

Press this pad to select the timer feature.

AUTOMATIC OVEN Light

This lights anytime the oven has been programmed to automatically turn on or off.

HOUR and MIN. Pads

These pads allow you to set times up to 11 hours and 59 minutes.

As a safety feature, this oven will automatically shut off after 12 hours. On models with touch pad clock controls this feature may be deactivated to allow the oven to be left on for more than 12 hours.

To deactivate or reactivate the Automatic Oven Shut-Off, press and hold both the MIN. +/– pads for about 4 seconds.

OVEN ON Light

Glows anytime the oven is heating. The light will flash when the oven automatically turns off to remind you to turn the Oven Temperature knob to OFF.

	Oven Temperature Knob
	Turn this knob to the setting you want. The
	temperature will be displayed to indicate
	setting. Display will change back to time
8	after a few seconds.

PREHEATED Light

Glows when the oven reaches your selected temperature.

CLEAN Light

Glows when the oven is in the self-clean cycle. After the self-clean cycle, the light will flash. Unlatch the door and turn the Oven Temperature knob to OFF.

Do not lock the oven door with the latch during cooking. The latch is used for self-cleaning only.

TEMP RECALL

Press the – pad above TEMP RECALL to display the selected oven temperature.

Display

Shows the time of day and the time set for the timer.

If “F—and a number or letter” flash in the display and the oven control signals, this indicates a function error code.

If your oven was set for a timed oven operation and a power outage occurred, the clock and all programmed functions must be reset.

The time of day will flash in the display when there has been a power outage.

CLOCK Pad

Press this pad before setting the clock.

START TIME ON/OFF Pad

Press this pad and the HOUR and MIN. pads to delay the starting of your oven up to 11 hours and 59 minutes.