Installation Instructions
3RECONNECTING GAS
Listed connector ANSI Z21.24 / CSA 6.10
FLARE NPT
1/8" NPT PIPE PLUG FOR CHECKING GAS INLET PRESSURE
3/8" NPT
PIPE SIZE
AT LEAST 1/2"
Note: The connector and fittings are designed for use only on the original installation and are not to be reused for another appliance or at another location. Keep flare end of adaptor free of grease, oil and thread sealant. Caution: Use adapters as shown. Connector nuts must not be connected directly to pipe threads.
TIGHTEN ALL CONNECTIONS
USING TWO ADJUSTABLE WRENCHES.
DO NOT OVERTORQUE GAS CONNECTIONS!
4 LEAK TEST
WARNING: NEVER USE AN OPEN
FLAME TO TEST FOR GAS LEAKS.
TIGHTEN THE FLEXIBLE
GAS LINE USING TWO
ADJUSTABLE WRENCHES.
3