GE PTDS650GMWT Changing Direction of Door Opening, Adding Cover Plate to Rear of Cabinet

Installation Instructions

ADDING ELBOW FOR EXHAUST THROUGH BOTTOM OF CABINET

• Insert the elbow through the rear opening and connect

it to the dryer internal duct.

13CHANGING DIRECTION OF DOOR OPENING

• Apply duct tape on the joint between the dryer internal

duct and elbow, as shown on page 7.

CAUTION:

Internal duct joints must be secured with tape, otherwise they may separate and cause a safety hazard.

ADDING COVER PLATE TO REAR OF CABINET

PLATE

(KIT WE1M454)

Connect standard metal elbows and ducts to complete the exhaust system. Cover back opening with a plate (Kit WE1M454) available from your local service provider. Place dryer in final location.

WARNING-NEVER LEAVE THE BACK OPENING WITHOUT THE PLATE.

REMOVE 4

HINGE SCREWS.

ROTATE DOOR 180°

AND REINSTALL.

REMOVE 4 HOLE PLUGS AND PLACE THEM IN THE HOLES ON THE OPPOSITE SIDE.

8