Caring for your Dryer
When not in use:
After each load:
Every week:
Every month:
To maintain the performance of the Dryer, follow the simple steps below:
Switch off the electricity and remove the plug, ensuring hands are dry.
Turn the Drum by hand to ensure all items have been removed.
Clean the Filter by rinsing under the tap or using a vacuum cleaner.
Empty the Water Container.
Wipe the drum, the front of the condenser and the door seal with a damp cloth.
Remove Condenser unit and clean any build up of fluff or lint from between the plates by rinsing it under the tap with cold water. This should be done from the rear of the Condenser unit.
Cleaning:
Automatic/ Economy Models
Clean exterior metal and plastic surfaces with a damp cloth or silicon polish only.
Every 6 months vacuum the Air intake grille and Vents at the rear of the appliance, to remove any build up of fluff or lint.
Do not use abrasive cleaners, scouring agents, acids, chlorine bleach or metal polish to clean any part of the appliance as they may cause damage.
Occasionally clean the surface of the sensor inside the drum with vinegar to remove water contaminants. Apply carefully with a cloth. This will maintain the drying performance of the machine.
Disposal of the appliance
To minimise the risk of injury to children please dispose of your product carefully and safely. Remove all doors and lids (where fitted). Remove the mains cable (where fitted) by cutting off flush with the appliance and always ensure that no plug is left in a condition where it could be connected to the electricity supply. To help the environment, Local Authority instructions should be followed for the disposal of your product.
14