Something Wrong?
Before calling a Service Engineer, please check through the following list.
THERE MAY BE NOTHING WRONG
DRYER WILL NOT START
CHECK THE POWER SUPPLY
Has the fuse blown in the plug or the main fuse box?
(Try plugging in another appliance to check)
If the fuse has blown in the plug top, refer to Electrical Require- ments.
Are you using an extension lead? (Many extension leads are not suitable. Try plugging the Dryer directly into a socket to check.)
CHECK THE SETTINGS
Is the Door fully closed?
(Try opening and closing the door again)
Has the Timer control been set? (Try resetting the timer and pressing the start button again)
Has the Start button been pressed hard enough? (Try pressing Start again)
IMPORTANT NOTICE: The Start button must be pressed every time the door is opened to
LOAD IS NOT DRY OR TAKES
LONGER THAN NORMAL TO DRY
CHECK THE FOLLOWING
Does the fluff filter need cleaning? (It should be cleaned after every load)
Does the water container need emptying?
(It should be emptied after every load)
Does the Condenser unit need cleaning?
(It should be cleaned every month)
Have the Air intake grille or rear Vents of the Dryer been obstructed?
CHECK THE SETTINGS
Has the Empty water light come on? (Empty the Water bottle after every load)
Have you selected the correct heat setting? (Refer to Drying Guide and check the heat setting switch)
Have you selected the correct time for the load? (Refer to Drying Guide – this can vary according to Washing machine spin speeds, load size and fabrics being dried).
Have you mixed cottons with synthetics? (See page 7)
If you have been through the above and there is still a problem, you should identify your
Service Agent using the list on the next page and contact your Local Service Office.