JVC KD-SC800R manual Press and hold Disp display for a while, Select the setting or color you want

Page 24

Selecting the display color		Changing the standard plate

ENGLISH

This section is only for KD-SC800R.

You can select the color of the display according to your preference.

When shipped from the factory, “ALL DEMO” is selected.

1 Press and hold DISP (display) for a while.

The last selected setting appears on the display.

2 Select the setting or color you want.

Each time you press the button, the selection changes as follows:

ALL DEMO O SOURCE O BLUE O OCEAN O PURPLE O PINK O ROSE O RED O (back to the beginning)

•When “ALL DEMO” is selected:

The display color changes every 6 seconds. (rose = pink = ocean = red = purple

= blue = back to the beginning)

•When “SOURCE” is selected:

The display color is fixed to red while listening to FM or AM, and to blue while listening to CD.

3 Finish the setting.

Note:

If no operation is done for about 15 seconds or if any other button is pressed, the setting is also finished.

This section is only for KD-SC800R.

You can change the standard plate with another plate supplied with your unit.

You can also download them by visiting <http://www.jvc.co.jp/jvccar>.

•When changing the plate, be careful not to leave your fingerprints on the plate or cover.

1 Loosen the screws with the supplied hex screwdriver.

2 Remove the plate cover and the standard plate.

Standard plate

Plate cover

24

Image 24

Contents KD-SC800R/KD-S901R KD-S901RHow to reset your unit Position And Reproduction Of LabelsBottom panel of the main unit Name/Rating plateContents Mode button Location of the ButtonsControl panel Display windowTurning on the power To drop the volume in a momentTo turn off the power Basic OperationsSetting the clock Radio Operations Listening to the radioSearching a station automatically Auto search Searching a station manually Manual searchFM station automatic preset SSM When an FM stereo broadcast is hard to receiveStoring stations in memory Tune in to a station you want while M manual is flashingManual preset P1 flashes for a few secondsRDS Operations What you can do with RDSTo use Network-Tracking Reception Using TA Standby Reception Press T TP/PTY again. The TP indicator disappearsPress T TP/PTY to activate TA Standby Reception To deactivate the TA Standby ReceptionUsing PTY Standby Reception To deactivate the PTY Standby ReceptionSearching your favorite programme To store your favorite programme typesPress and hold T TP/PTY for more Ex. When Rock M is selected To activate programme search, follow the procedure belowSetting the TA volume level Automatic clock adjustmentChanging the display mode while listening to an FM station PTY codes Same programme can be received on different frequenciesCD Operations Playing a CDOpen the control panel Insert a CD into the loading slotTo stop play and eject the CD To go to a particular track directlyTo fast-forward or reverse the track To go to the next or previous tracksProhibiting CD ejection To play back tracks at random Disc Random PlayWhile pressing CD, press and hold for more than 2 seconds Sound Adjustments Select the sound mode you wantFor Preset values Adjusting the sound Adjust the settingSelect the item you want to adjust Repeat steps 1 and 2 to adjust the other itemsChanging the general settings PSM Basic ProcedureOther Main Functions Preferred Setting Mode PSM items Indications Selectable values/itemsSee 24H/12HSelect the setting or color you want When ALL Demo is selectedWhen Source is selected Press and hold Disp display for a whileHow to use the cutout plates When attaching a standard plateWhen attaching a cutout or downloaded plate Connectors Detaching the control panelAttaching the control panel Using the Remote Controller Installing the batteryLocation of the buttons Troubleshooting Symptoms Causes RemediesGeneral PlaybackMaintenance Handling discsSpecifications FM TunerMW Tuner LW TunerHaving Trouble with operation? Before mounting Press Vor dem Einbau Drücken SieAvant le montage Appuyer sur Voordat u aan de montage van het apparaatHinweis RemarqueBe sure to ground this unit to the car’s chassis OpmerkingKD-SC800R