Electrolux LAVATHERM 58840 Drying cycle complete / removing laundry, Open door, Close the door

Daily use 21

WARNING!

Laundry and drum can become hot. Risk of burns!

2.Load or remove laundry items.

3.Close loading securely. Lock must audibly lock.

4.Press the START PAUSE button to continue the drying cycle.

Drying cycle complete / removing laundry

Once the drying cycle is complete, display shows a blinking "0", under anti-crease

icon appear dash. If the BUZZER button has been pressed, an acoustic signal sounds intermittently for about one minute.

The drying cycles are automatically followed by an anti-crease phase which lasts around 30 minutes. The drum rotates at intervals during this phase. This keeps the laundry loose and free of creases. The laundry can be removed at any time during the anti-crease phase. (The laundry should be taken out towards the end of the anti-crease phase at the latest to prevent creases from forming.) If LONG ANTI- CREASE function has been selected, the anti-crease phase is lengthened by 60 minutes.

1.Open door.

2.Before removing the laundry, remove fluff from the micro-fine filter. It is best to use a damp hand for this purpose. (See “Care and cleaning” chapter.)

3.Remove laundry.

4.Turn the programme selector to OFF.

After each drying cycle:

-Clean the micro-fine filter and fine filter

-Drain the condensed water container (See chapter “Care and cleaning”.)

5.Close the door.