20Daily use
all buttons and the programme knob. The child lock can be activated or deactivated by holding down the OPTION and OK buttons simultaneously for 5 seconds.
– Before programme is started: Appliance cannot be used
– After programme is started: Programme in operation cannot be changed
The 
icon appears in the display to indicate that the child safety device is activated. The child safety device is not deactivated once the programme comes to an end.
If you want to set a new programme, you must first deactivate the child safety device.
Starting the programme
Press the START PAUSE button. The pro- gramme is started.
The programme progress is shown in LCD by appropriate set of icons. From left to the right, from IRON DRY 
to 
icon depends on the drying cycle chosen. E. g. in case of STORAGE programme the following
status icons are visible: | . Current |
cycle progress is marked by flashing dash under status icon. When appropriate part of drying cycle is accomplished dash becomes steady and appears flashing under next status icon.
Changing programme
To change a programme which has been selected by mistake once the programme has started, first turn the programme selector to OFF and then reset the programme.
The programme can no longer be changed directly once the programme has started. If nevertheless there is an attempt to change the programme on the programme knob, the programme progress display and the maintenance indicators flash. If an option button (excluding the BUZZER button) is pressed, Err appears in the mul- tidisplay. The drying programme is not however affected by this (laundry protec- tion).
Putting in extra items or taking items out before end of programme