Care and cleaning 25
2. Pour condensed water out into a ba- sin or similar receptacle.
3. Slide outlet connections in and refit water reservoir.
If the programme has been interrup- ted as a result of the water reservoir being full: Press the START PAUSE button to continue the drying cycle.
The water reservoir has a volume of approx. 4 litres. This is sufficient for around 7 kg of laundry which has previously been spun at 1000 revolutions/ minute.
The condensate can be used as distilled water, e.g. for steam ironing. However first filter the condensate (e.g. with a coffee filter) to remove any residue and small pieces of fluff.
Cleaning heat exchanger
If the heat exchanger 
is displayed, the heat exchanger needs to be cleaned.
CAUTION!
Operating when the heat exchanger is blocked with fluff can damage the dryer. This also increases energy consumption.
1. Open door.
2. Open door in plinth. To do this, press the release button on the bottom of the door aperture and open the door in the plinth to the left.
3. Clean fluff from the inside of the door and the heat exchanger front chamber. Wipe the door seal with a damp cloth.