37
Cleaning and replacing the dust filters
Cleaning the dust filters
Clean the dust filters after every 1000 hours of use. If they are note cleaned periodically, they can become clogged with dust, preventing proper ventilation. This can cause overheating and damage the projector.
2
1
Follow these steps:
1Turn the projector off. Wait for the Power LED to stop flashing then unplug the power cord.
2Allow the projector at least 30 mins to cool down.
3Unplug the corner (Illustration #1)
4Pull out the dust filter (Illustration #2)
5To clean the dust filters, use a small vacuum cleaner designed for computers and other office equipment.
6If the dirt is difficult to remove or the filter is broken, please contact your local dealer or service center to obtain a new filter.
English
