•Real humid conditions may cause condensation build up inside the unit causing the malfunction. If this occurs, allow the unit to stand and dry out for several hours before using again.
•When plugging into outlet, make sure to match the wider prong of the plug, to the wider entrance of the electric socket, making sure plug is fully in socket.
•When disconnecting, grip plug to remove. DO NOT pull the cord.
•Do not position your Jeff Gordon Radio/CD Helmet near heat sources such as radiators, heat registers, stoves, or any other appliance (including amplifiers) that produces heat.
•If you are not using your Jeff Gordon Radio/CD Helmet for an extended length of time, disconnect plug from socket.
What to do with a damaged
Jeff Gordon Radio/CD Helmet.
The Jeff Gordon Radio/CD Helmet should be serviced by qualified service personnel when:
• The
• Objects have fallen into, or liquid has been spilled into the appliance enclosure.
• The CD player has been exposed to rain.
• The CD player has been dropped, or the enclosure damaged.
• The CD player does not appear to operate normally or exhibits a marked change in performance.
Caution
To reduce the risk of electric shock, do not remove cover or bottom of your helmet radio. Refer servicing to qualified service personnel.
Grounding and Polarization
Precautions should be taken to ensure that the grounding or polar- ization of the Jeff Gordon Radio/CD Helmet is effective.
Cleaning
The appliance should be cleaned only as recommended by the manufacturer.
Power Lines
An outdoor antenna should be located away from power lines.
AC/DC Adapter/
The Radio/CD Helmet is equipped with an AC DC adapter. This adapter converts the input from the AC current to DC current.
Under no circumstances should the Jeff Gordon Radio/CD Helmet be connected to a socket on the wall without first passing through the supplied adapter. If for any reason the adapter supplied ceases to operate, you should contact a qualified service agency.
12 | 13 |
