Special Care and Handling

• Avoid rough handling such as bumping or dropping.

• Avoid moisture and extreme temperatures. For best results, use between the temperatures of 39º F and 100º F (4º C and 38º C).

• Clean using only a slightly damp cloth. Do not use cleaners with chemical agents.

• To prevent fire or shock hazard, DO NOT expose this appliance to rain or moisture.

• Remember to disconnect the Jeff Gordon Radio/CD Helmet from any outlet when not in use.

CAUTION: To reduce the risk of electric shock. DO NOT remove cover or bottom of your Radio/CD Helmet.

Send for servicing to qualified service personnel.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable l interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more

of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Excalibur Electronics reserves the right to make technical changes

without notice in the interest of progress.

 

 

 

 

LIMITED 90-DAY WARRANTY

EXCALIBUR

ELECTRONICS,

tal or consequential damages, so the

INC., warrants to the original consumer

above limitations and exclusions in

that its products are free from any elec-

these instances may not apply. The only

trical or mechanical defects for a period

authorized service center in the United

of 90 DAYS from the date of purchase.

States is:

If any such defect is discovered within

Excalibur Electronics, Inc.

the

warranty

period,

EXCALIBUR

13755 SW 119th Ave

ELECTRONICS, INC., will repair or

Miami, Florida 33186 U.S.A.

replace the unit free of charge upon

Phone: 305.477.8080

receipt of the unit, shipped postage pre-

Fax: 305.477.9516

paid and insured to the factory address

www.ExcaliburElectronics.com

shown at right.

 

 

 

Ship the unit carefully packed, prefer-

The warranty covers normal con-

ably in the original carton, and send it

prepaid, and adequately insured. Include

sumer use and does not cover damage

a letter, detailing the complaint and

that occurs in shipment or failure that

including your daytime telephone num-

results from alterations, accident, mis-

ber, inside the shipping carton. If your

use, abuse, neglect, wear and tear, inad-

warranty has expired and you want an

equate maintenance, commercial use, or

estimated fee for service, write to the

unreasonable use of the unit. Removal

above address, specifying the model and

of the top panel voids all warranties.

the problem.

This warranty does not cover cost of

repairs made or attempted outside of the

PLEASE DO NOT SEND

factory.

 

 

 

 

 

applicable

implied warranties,

YOUR UNIT WITHOUT

Any

RECEIVING

including warranties of merchantability

AN ESTIMATE

and fitness, are hereby limited to 90

FOR SERVICING.

DAYS from the date of purchase.

WE CANNOT

Consequential or incidental damages

STORE YOUR UNIT!

resulting from a breach of

 

any

applicable

express

or

 

implied

warranties

are

 

hereby

excluded.

Some

 

states do not allow limi-

 

tations on

the

duration

 

 

of implied

warranties

 

 

and

do

not

allow

 

 

exclusion of inciden-

 

 

14

15

Page 8
Image 8
Excalibur electronic RD501-24 manual Special Care and Handling

RD501-24 specifications

The Excalibur electronic RD501-24 is a state-of-the-art device designed for various industrial applications, particularly for controlling and monitoring automation systems. This advanced unit stands out for its reliability, precision, and extensive feature set, making it a preferred choice among professionals in the field.

One of the main features of the RD501-24 is its high-performance microcontroller, which enables efficient processing of complex tasks. This microcontroller ensures that the device can handle multiple input and output operations seamlessly, making it ideal for environments where speed and accuracy are crucial.

The RD501-24 supports a wide range of communication protocols, including Modbus, CANbus, and Ethernet. This versatility allows it to integrate easily with existing systems, facilitating smooth data exchange and operational continuity. Users can connect to various sensors and actuators, enabling real-time monitoring and control of processes.

The RD501-24 is equipped with a robust display and user-friendly interface, allowing operators to configure settings and monitor system performance without extensive training. The graphical interface provides clear visualizations of data, enhancing user interaction and simplifying troubleshooting.

In terms of connectivity, the RD501-24 boasts several input and output ports, allowing for extensive customization based on specific project requirements. This flexibility is essential in modern automation, where adaptability is key to optimizing system performance.

The device also incorporates advanced diagnostic features that help in maintaining operational integrity. Built-in self-testing and error reporting systems can alert users to potential issues before they escalate, minimizing downtime and maintenance costs.

One of the notable characteristics of the RD501-24 is its sturdy design, built to withstand harsh industrial environments. With an IP65 rating, the device is dust-tight and resistant to water, making it suitable for both indoor and outdoor applications.

Furthermore, the RD501-24 complies with industry standards, ensuring that it meets the necessary safety and quality requirements. This not only guarantees reliability but also instills confidence in users regarding the performance of the device.

In summary, the Excalibur electronic RD501-24 is a powerful tool for automation and control, combining advanced technologies with user-centric design. Its high performance, flexible connectivity, and robust features position it as an essential component for any modern industrial automation system, ensuring efficiency and reliability in various applications.