5Maintenance and cleaning
Filter Cartridge / Door Inner Surface
Lint and fibres released from the laundry to the air during the drying cycle are collected in the “Filter Cartridge”.
C Such fibre and lint are generally formed during wearing and washing.
C Always clean the filter and the inner surfaces of the cover after each drying process.
C You can clean the filter and filter area by vacuum cleaner.
To clean the filter:
1. Open the loading door.
2. Remove the cover filter by pulling it up and open the filter.
3. Clean lint, fibre, and cotton raveling by hand or with a soft piece of cloth. 4. Close the filter and place it back into its seat.
C Clogging may arise on the filter surface after using your machine for some time; if this occurs, wash the filter with water and dry it before using again.
C Clean the entire inner surface of the cover and door gasket.
Sensor (models equipped with a sensor)
There are humidity sensors in your machine that detect whether the laundry is dry or not. For sensor cleaning;
1. Open the door of the machine.
2. Allow the machine to cool off if drying has been carried out.
3. Wipe the metal sensors with a soft cloth, dampened with vinegar and dry them.
C Clean metal sensors 4 times a year. A Never use solvents, cleaning agents or
substances alike when cleaning as these might cause fire and explosion!
15 EN