7Maintenance and cleaning
Service life of the product extends and frequently faced problems decrease if cleaned at regular intervals.
BThis product must be unplugged during maintenance and cleaning works (control panel, body, etc.).
Lint Filter / Loading Door Inner Surface
Lint and fibres released from the laundry to the air during the drying cycle are collected in the Lint Filter.
C *Such fibre and lint are generally formed during wearing and washing.
AAlways clean the lint filter and the inner surfaces of the loading door after each drying process.
C You can carefully clean the lint filter housing with a vacuum cleaner.
To clean the lint filter:
1.Open the loading door.
2.Remove the lint filter by pulling it up and open the lint filter.
3.Clean lint, fibre, and cotton by hand or with a soft piece of cloth.
4.Close the lint filter and place it back C into its housing.A layer can build up on the lint filter
pores that can cause clogging of the lint filter after using the machine for a while. Wash the lint filter with warm water to remove the layer that builds
up on the lint filter surface. Dry the lint filter completely before reinstalling it.
C Clean the entire inner surface of the loading door and loading door gasket with a damp cloth.
Cleaning the sensors
27 EN