Beko DPU 8360 W manual

Page 32

Drum lighting does not turn on. (On models with lamp)

Dryer is not switched on with the On / Off button. >>> Make sure that the dryer is switched on.

Lamp is defective. >>> Call Authorized Service Agent to have the lamp replaced.

End/Anti-creasing symbol is on.

Anti-creasing programme is activated in order to prevent laundry that has remained in the machine from creasing. >>> Turn off the dryer and take out the laundry.

End symbol is on.

Programme is over. Turn off the dryer and take out the laundry.

Lint Filter Cleaning symbol is on.

Lint filter is not cleaned. >>> Clean the lint filter.

Lint Filter Cleaning symbol is flashing.

Filter housing is clogged with lints. >>> Clean the lint filter housing.

A deposit has built up on the lint filter pores that may cause clogging. >>> Wash the lint filter with warm water.

Filter drawer is clogged. >>> Clean the sponge and the filter cloth in the filter drawer.

Water leaks from the loading door

Lint has accumulated on the inner surfaces of the loading door and on the surfaces of the loading door gasket. >>> Clean the inner surfaces of the loading door and the surfaces of the loading door gasket.

Loading door opens spontaneously.

Loading door is ajar. >>> Push the loading door to close until you hear a locking sound.

Water Tank warning symbol is on/flashing.

Water tank is full. >>> Drain the water tank.

Water draining hose is bent. >>> If the product is connected directly to a wastewater drain, check the water drain hose.

Filter Drawer Cleaning warning symbol is flashing.

Filter drawer is not cleaned. >>> Clean the sponge and the filter cloth in the filter drawer.

AIf you cannot eliminate the problem although you follow the instructions in this section, consult your dealer or the Authorized Service Agent. Never try to repair a nonfunctional product yourself.

32

EN

Image 32
Contents Dry & Save DPU 8360 W Explanation of symbols 2960310462EN/260911.1754Table of Contents Dryer OverviewTechnical specifications Main Model Code Type label is behind the loading doorImportant safety instructions General safetyPage Childrens safety Intended useRemoving the transportation safety assembly InstallationAppropriate installation location Under counter installation Connecting to the drainConnecting the water drain hose Mounting over a washing machineAdjusting the feet First useDisposing of packaging material Transportation of the productDisposing of the old product Fitting a different plug Electrical requirementsThis appliance must be earthed Washer/dryer combination Preparations for drying Things to be done for energy savingLaundry suitable for drying in the machine Laundry unsuitable for drying in the machineWeights g Preparing laundry for dryingCorrect load capacity Home articlesLoading the laundry Selecting a Programme and Operating Your Machine Control panelPreparing the machine Programme selectionMain programmes Additional programmesTimer programmes Daily QuickBaby Clothing DelicatesProgramme selection and consumption table Auxiliary functions Cancelling the Time Delay Time DelayChanging the delay time Starting the programme Progress of programmeChild-proof Lock Changing the programme after it has startedCancelling the programme Adding / removing laundry in Pause modeEnd of programme Lint Filter / Loading Door Inner Surface Maintenance and cleaningCleaning the sensors Cleaning the filter drawer Draining the water tankPage Cleaning the evaporator Troubleshooting Page Important notes What is covered?What is not covered? Republic of Ireland Service once the manufacturers guarantee has expiredUK Mainland & Northern Ireland