Beko DCU 8330 GX manual Ending the programme through canceling, End of programme

Page 19

Ending the programme through canceling

A new program can be selected and started after “Program cancel” is activated in order to change the drying program.

To cancel any selected programme: Press “Start/Pause/Cancel” button for about 3 seconds. “Lint filter cleaning” and “Water tank” warning symbols light up and “End” label appears on the screen as a reminder at the end of this period.

A As the inside of the machine will be excessively hot when you cancel the program while the machine is running, activate the ventilation program to cool it down.

CIf you change the position of programme selection knob while your machine is running, then the machine stops, current programme is cancelled and new programme information is displayed.

End of programme

“Filter cleaning” and “Water tank” warning symbols light up and “End” label appears on the screen in the programme follow- up indicator when the programme ends. The door can be opened and the machine becomes ready for a second cycle.

Press “On/Off” button to turn off the dryer.

CWhen selected, the 2-hour anti creasing programme will be activated to prevent laundry from creasing if you do not take the laundry out after the programme has come to an end.

CClean the filter after each drying (please

see, Filter cleaning).

CDrain the water tank after each drying

(please see, Water tank)

19 EN

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Dryer DCU 8330 GX Read this manual prior to initial operation of the product General safety Important safety informationIntended use Children’s safety Installation Disposing of packaging material Adjusting the feetElectrical connection First useTransportation of the machine Technical specificationDisposing of the old machine Laundry unsuitable for drying in the machine Initial preparations for dryingThings to be done for energy saving Laundry suitable for drying in the machineCorrect load capacity Preparing laundry for dryingLoading the laundry Control panel Selecting a Programme and OperatingYour MachineProgramme selection Preparing the machineShirt Time displayProgramme selection and consumption table Programme table Anti-creasing Changing the contrastAuxiliary function Drying degreeProgress of programme Changing the delay timeCanceling the time delay Starting the programmeChanging the programme after the programme has started Adding/removing laundry in standby modeChild-proof lock End of programme Ending the programme through cancelingFilter Cartridge / Door Inner Surface SensorFor the condenser Water tankPage Suggested solutions for problems
Top Page Image Contents