Beko DCU 8330 GX manual Changing the delay time, Canceling the time delay, Starting the programme

Page 17

intervals to remind that the condenser needs cleaning.

Door open

Dryer door open symbol lights up.

Time delay

With the “Time delay” function you can delay the programme start up to 24 hours.

1.Open the loading door and put the laundry in.

2.Set the drying programme and spin speed, and if required, select the auxiliary functions.

3.Press “Time delaying” buttons “+” and “-” to set the desired time delay. The time delay symbol will flash.

4.Press “Start/Pause/Cancel” button.

Then the time delay starts to count

down. The Time delay symbol lights up. Start symbol lights up.

The “:” in the middle of the displayed time delay will start flashing.

More laundry may be loaded or taken out during the time delay period. At the end of the time delay countdown process, time delay symbol fades, drying process starts and the programme duration is displayed. The time on the display is the total of normal drying time and delay time.

Time delay is started by pressing the start/ pause/cancel button in the exemplary figure.

Changing the delay time

If you want to change the time during the countdown:

1.Press “Start/Pause/Cancel” button for

3 seconds to cancel the programme. Time delay function must be set again for the required time.

2.Press Time delay buttons “+” or “-” to

17

set the desired time delay.

3.Press “Start/Pause/Cancel” button. The Time delay symbol lights up. Pause symbol fades. Start symbol lights up.

4.The “:” in the middle of the displayed time delay will start flashing.

Canceling the time delay

If you want to cancel the time delay countdown and start the programme immediately:

1.Press “Start/Pause/Cancel” button for 3 seconds to cancel the programme.

2.Then, press “Start/Pause/Cancel” button to start the desired programme.

Starting the programme

1.Press “Start/Pause/Cancel” button to start the programme.

2.“Start/Pause” symbol will light up to indicate that the programme has started and “:” symbol between the remaining time will continue flashing.

Progress of programme

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Drying

 

Wardrobe

 

Anti-

 

 

 

(Extra)

 

creasing

 

Iron

 

Ventilation

 

 

The progress of a running programme is shown through a number of symbols on the screen.

At the beginning of each programme step, the relevant symbol in the series of symbols will light up and thus, all symbols will remain lit up at the end of the programme. The symbol that is lit up at the far right of the series of symbols indicates the step that is being carried out.

“Drying”:

-Lights up in all programmes apart from drying and ventilation.

“Iron Dry”:

-Starts to illuminate when the drying degree reaches “iron dry” step and remains illuminated until the next step.

“Cupboard Dry”:

Starts to illuminate when the drying degree reaches “wardrobe dry” step, and remains illuminated until the next step.

“Extra Dry”:

Starts to illuminate when the drying degree reach to “wardrobe dry extra” step.

“Ventilation”:

-Illuminates when the programme ends.

EN

Image 17
Contents Dryer DCU 8330 GX Read this manual prior to initial operation of the product General safety Important safety informationIntended use Children’s safety Installation Electrical connection Adjusting the feetFirst use Disposing of packaging materialDisposing of the old machine Technical specificationTransportation of the machine Things to be done for energy saving Initial preparations for dryingLaundry suitable for drying in the machine Laundry unsuitable for drying in the machineCorrect load capacity Preparing laundry for dryingLoading the laundry Control panel Selecting a Programme and OperatingYour MachineProgramme selection Preparing the machineShirt Time displayProgramme selection and consumption table Programme table Auxiliary function Changing the contrastDrying degree Anti-creasingCanceling the time delay Changing the delay timeStarting the programme Progress of programmeChild-proof lock Adding/removing laundry in standby modeChanging the programme after the programme has started End of programme Ending the programme through cancelingFilter Cartridge / Door Inner Surface SensorFor the condenser Water tankPage Suggested solutions for problems