Bosch Appliances Maxx WTL 6500 instruction manual Converting the installed load

Converting the installed load

The dryer has been designed for 10 or 1￿ amperes

If the dryer fuse (factory setting) does not correspon to the socket fuse (household fuse), complete the fo lowing steps:

1￿ Connect the dryer to the mains electricity (see￿pa+ ge￿40).

2￿ Turn	theprogramme	selectoro Off.
3￿ Simultaneously press		and hold Start/Stopthe	and
Low	Heat buttons.
4￿ Turn	theprogramme	selector clockwise to	•extra
dry".
5￿ Release both buttons.
6￿ Turn	theprogramme	selector 5 positions	further
clockwise.
7￿ Press	the Start/Stop button.

8￿ Press theLow Heat button (only if conversion is necessary).

iThe value set (10 or 1￿) will be shownDis￿in the play.

i If no value is shown: switch off the dryer and s again.

9￿ Press the Start/Stop button. The value is stored and thedisplay goes out.

10￿Turn theprogramme selectoro Off.

47