The door catch can be reversed if necessary.
Reversing the door The door is hinged on the right at the factory.
catch
You will need:
- Torx screwdrivers, sizes T10 and T20.
- Medium(sized slotted screwdriver.
These are available from specialist suppliers.
Carefully tighten all screws by hand. They could oth wise be overtightened.
Do not use a power screwdriver.
To | remove | the | door: |
! | Place the | door on something soft (e.g.a blanket) | |
| so that it | is | not damaged. |
Undo the screw for the bottom door hinge.
Hold the door firmly and unscrew the top door ge.
Pull the door and the hinge outwards to the fro
Lay the door on the blanket.
43