14www.aeg.com
8.3Water container full — indication
By default the indication LED is always on. It comes into the view at the end of the cycle or when the water container is full. When you use an external equip- ment to drain the container, the LED can be off.
To activate or deactivate the indication:
1.Turn the programme dial to availa- ble programme.
2.Push at the same time the Dry Plus and Buzzer buttons and hold down until you see the correct setting:
– the LED is off and the symbol
goes into the view - The LED is permanently off
– the LED is on and the symbol 
goes into the view - The
LED is activated
9.CARE AND CLEANING
9.1 Cleaning the filter | The filter collects the fluff. The | ||
At the end of each cycle the filter LED is | fluff occurs while the cloths are | ||
dried in the tumble dryer. | |||
on to tell you that the filter must be |
| ||
cleaned. |
| ||
|
|
| |
| To clean the filter: |
| |
|
| 1. | Open the door. |
|
| ||
|
| 2. | Pull the filter. |
|
|
|
|
3. Open the filter.
4. Use a moist hand to clean the filter.