AEG T76280AC Unpacking, Installation under a counter, Load door reversal, Electrical connection

Page 21

• The temperature of the hot air which occurs in the tumble dry- er can increase to 60 °C. The appliance must not be instal- led on the floor which is not re- sistant to high temperatures.

When the tumble dryer oper- ates, the room temperature must not be lower than +5 °C and higher than +35 °C. This can cause unwanted effect on the performance of the appli- ance.

If it is necessary to move the appliance, it must be moved vertically.

The appliance must not be in- stalled behind a lockable door, a sliding door, a door with a hinge on the opposite side to that of the appliance in such a way that a full opening of the tumble dryer is restricted.

It is possible to adjust the height of the tumble dryer. To do that adjust the feet (see picture).

15mm

12.2Unpacking

CAUTION!

Before use all parts of the transport packaging must be removed.

To remove the polystyrene blockages:

1.Open the load door.

2.Pull plastic hose with the polystyrene blockages out from the drum.

ENGLISH 21

12.3Installation under a counter

The appliance can be installed as free- standing or below the kitchen counter with correct space (see picture).

 

600 mm

> 850 mm

600 mm

 

12.4The load door reversal

The load door can be installed by the user in the opposite side. It can help to easily put and remove the laundry or if there is a limit to install the appliance. (see separate leaflet).

12.5Electrical connection

Connect the machine to an earthed socket, in accordance with current wir- ing regulations.

Make sure that the electrical data on the rating plate agrees with the power supply.

Always use a correctly installed shock- proof socket.

Do not use multiple plugs and exten- sion cables. There is a risk of fire.

Should the appliance power supply cable need to be replaced, this must be carried out by our Service Centre.

Image 21
Contents User’s Manual Contents General safety Safety InstructionsInstallation Child safetyUse Product Description Discard the appliancePackaging materials Stacking kit AccessoriesDraining kit Pedestal with the drawerDisplay Control PanelProgrammes Before First USEPro Load Available Fab Properties Ric Preparing the laundry Using the ApplianceSetting a programme Switching on the applianceLoading the laundry Auto stand-by functionSpecial functions Delay Start functionBuzzer function Time Drying functionHints and Tips Care and Cleaning Cleaning the filterWater container full indication Water container Draining the condensedCleaning the condenser Cleaning the control panel Trouble Shooter and ServiceHousing Cleaning the drumInactive Push the Start/Pause button Drum internal lamp Technical InformationAppliance positioning InstallationUnpacking Installation under a counterLoad door reversal Electrical connectionWarranty Showroom