Trouble Shooting, Prompt and Alarm Information

Trouble Shooting

The following must be confirmed before calling for service:

	Problem	Possible Cause

		● Is the power supply plugged in and switched on.
	The dryer does not	● Plug another appliance into the wall socket to
		test if there is power.
	start
		●Is the door closed tightly;

		● Check if a drying program has been set;
		● the Start/Pause button has been pressed;
		● The water collection box is full;

		●Is the drying program setting correct;
		●Has the filter screen been cleaned ;
		●Is the condenser blocked;
	The drying result is not	● Does the amount of the loaded laundry
		exceed the rated load;
	good and the drying	● Has the loaded laundry been spun dry;
	time is too long.
		●Is the vent duct blocked;

		● Has the surface of the inside of the drum
		got a deposit layer forming, if so clean the
		drum interior;

		The remaining time will be adjusted and corrected
		continuously and automatically based on the
	The remaining time	following factors:
	display is halted, or the	●Type of laundry;
	remaining time displayed	●Loaded amount;
	is skipping	●The degree of spinning dry of laundry;
		●Ambient temperature;
		The automatic adjustment is a normal operation.

		14

Trouble Shooting

In case of an improper operation or trouble with the machine when it operates, the code corresponding to the trouble will be displayed on the screen: