English
Green Ground | Green Power Cord | |
Ground Wire | ||
Screw | ||
| ||
Green Neutral |
| |
Ground Wire |
|
Red
Power Cord
Strain Relief
Mounting Bracket
Brass Terminal
Terminal Block
Black
Tighten Nut to
These Threads
Nut
1.Remove the screws securing the terminal block access cover and the strain relief mounting bracket located on the back of the dryer upper corner.
2.Install a UL approved strain relief into the power cord entry hole of the mounting bracket . Finger tighten the nut only at this time.
3.Remove the green neutral ground wire from the green ground screw located above the terminal block.
Typical Conductor |
| |
Receptacle |
| |
| Black 240V | |
| White Neutral | |
Typical 4 | Red 240V | |
Conductor Cord | ||
| ||
| Green Ground |
11