Haier GDZ5-1C user manual Synthetic Light, Clean Filter Light

English

Synthetic Light:

•You must have synthetic button in its inward position in order to have the light "ON". When cycle is about to finish and goes in cool dry at the end, you will notice that the light will go "OFF".

Note: If the light does not come on then check the position of synthetic button. (Please refer to Cotton/Synthetic Button setting explanation, p.5)

Clean Filter

Clean Filter Light:

•When there are last 10 minutes left in the cycle, you will see that the light will come "ON". This is a reminder to clean the filter after the cycle is finished.

Clean Filter

Note: The light will come on automatically if the outside temperature of the exhaust duct is higher than 117˚F/47˚C.

9