Haier GDZ5-1C Installation Instructions, Unpacking Your Dryer, Tools and Materials Required

Page 18

English

INSTALLATION INSTRUCTIONS

•Select a suitable location for the dryer on a hard even surface away from direct sunlight or heat source e.g. radiators, baseboard heaters, cooking appliances etc. Any floor unevenness should be corrected with the leveling legs located on the

bottom of the dryer.

Unpacking Your Dryer

1.Remove all packaging material. This includes the foam base and all adhesive tape holding the dryer accessories inside and outside.

2.Inspect and remove any remains of packaging, tape or printed materials before using the dryer.

Tools and Materials Required

•Phillips head and flathead screwdrivers

•Channel-lock adjustable pliers

•1/2 inch open end wrench

•Carpenter’s level

•Measuring tape (12ft. min.)

•Duct tape

•Rigid or flexible metal 4 inch (10.2 cm) duct

•Vent hood

17

Image 18

Contents Quality Innovation Style Important Safety Instructions Read all instructions before using the applianceFor Future Use You will need it to obtain warranty service Model number Serial number Date of purchaseTable of Contents Features Dryer TimerOperating Instructions Understanding the Drying Temperature Cycle Type Heat Type CLOTHES/FABRICS Start Button Clean Filter Light Synthetic LightLint Filter Leveling LegsOperations Normal Operating SoundsDrying Tips Preparing clothes for dryingCare and Cleaning Guide Energy Saving TipsDryer does not operate TroubleshootingDryer making noise when drying Dryer is working but not drying the clothesElectrical Requirements It is your responsibilityGrounding Instructions For a grounded, cord-connected dryerInstallation Instructions Unpacking Your DryerTools and Materials Required Exhaust System Connections Requirements and InstructionsExplosion hazard Materials English Do Not Install Your Dryer Installation in Recess or ClosetLocation of Your Dryer Installation in Mobile Home Haier America New York, NY