Ariston ASL65VXS important safety instructions Exhaust ducting, Stacking kit Residential

Installation Instructions

EN	Exhaust ducting
	The ducting system for the dryer must be as short and
	straight as possible and with as few elbows as possible.
	Four-inch rigid metal ducting should be used, metal
	flexible ducting can be used but the maximum length
	of ducting if using this type will be reduced and
	bends in the duct will reduce this length further. Never
	use plastic ducting. All elbows must also be a minimum
	of 4-inch (100mm) diameter. Joints must be secured
	with ducting tape. Do not use screws, as lint can
	collect on the screws.
	Maximum length of duct:
	Number	Rigid Duct	Flexible Duct
	of Elbows:
	0	22 ft. (6.6m)	15 ft. (4.5m)
	1	18 ft. (5.4m)	12 ft. (3.6m)
	2	14 ft. (4.2m)	9 ft. (2.7m)
	3	6 ft. (1.8m)	4 ft. (1.2m)

The above assumes that an approved venting hood is used and that the flap on this hood must not have magnetic catches.

WARNING:

-The appliance MUST NOT be exhausted into a chimney, a wall, a ceiling, or a concealed space of a building.

-To reduce the risk of fire, this appliance MUST BE EXHAUSTED OUTDOORS.

-Do not discharge the exhaust air into a flue, which is used for exhausting fumes from other appliances burning gas or other fuel.

Depending on the frequency of use it is essential that the ducting is checked periodically and any fluff or debris removed.

RV/Marine Installations - When locating the appliance in a towable trailer or watercraft, position the machine over the axles or mid-ship where movement is at a minimum. Block the machine to prevent extreme movement or tipping.

Stacking kit - Residential

The dryer is provided with a stacking kit, which allows the dryer to be fitted to the top of an Ariston washing machine:

Model AW125NA

Model AW129NA

Model AW149NA

The kit contains all the necessary brackets and screws. Tools needed:

No.2 Philips Screwdriver 2mm drill, power or hand drill

SAFETY

For personal safety, DO NOT try to fit the dryer on top of the washing machine on your own. A second person should help to lift the tumble dryer onto the washing machine and to relocate the stacked washer and dryer.

1.You will need to get to the sides of the washing machine to fit the stacking kit and dryer. If necessary pull the machine away from its location to gain access to the machine to fit the stacking kit and dryer.

2.Follow the instructions provided with the stacking kit.

Stacking Kit - RV/Marine

RV/Marine Stacking Kit #SK02 available from Westland Sales: 1-800-356-0766.

14