Dryer Description
The front
Control Panel
The back
Drum
EN
Air Intake Vent
Model & Serial numbers
Control panel
Filter
OPTION
Buttons
Caution: Hot!
Clean Filter Progress
Light Lights
START/CANCEL
Button
Indicator
On/Off
Light
Programs Guide
Option
Lights
Heat
Icons
DISPLAY
PROGRAMS
Knob
ON/OFF
Button
The START/CANCEL button starts a selected program. When you press this button there will be one beep and the progress lights will flash to confirm the action. If you have not set a program, the buzzer will beep three times. When a program is running, holding in this button cancels the program and stops the dryer (see Start and Programs).
The OPTION buttons select available options for your selected program (see Start and Programs).
The Option lights indicate that the option has been selected by the button to the left of the appropriate light.
The Programs Guide allows you to consult a user friendly table of the available programs.
The Clean Filter light gives a reminder before every program that it is essential to clean the filter every time the dryer is used (see Maintenance and Care).
The On/Off indicator light signals that your dryer is in use or ready to select a program.
The ON/OFF button: If the dryer is running and this button is pressed, the dryer stops. Press again, the dryer restarts.
The Progress lights show you the status of the program. As each stage of the program starts the corresponding light turns on.
The Heat Icons indicate the heat setting of the selected program. High 
or Low .
Does not light if a Wool, Airing or Air Fluff program has been selected.
The PROGRAMS knob sets the program: rotate it until the indicator is pointing to the program you want to select (see Start and Programs).
3