Start the machine, Remove or add laundry

Drying

Switch the machine on - select the drying programme/time

•Select the drying programme or time. The lights “DROGEN/SECHAGE”, “AFKOELEN/REFROID.” and “EINDE/FIN” come on. The light of the “START/PAUSE-MARCHE/PAUSE” button flashes and the display shows the duration of the programme.

nexxt02

If required, press the “LAGE TEMP/DELICAT” button and/or the “ZOE- MER/ALARME” button or the “KORT/COURT” button.

Select the “STARTUITSTEL/D.DIFF.” if required. The selected delay appears on the display for 2 seconds, then the duration of the selected programme is displayed.

Start the machine

Press the “START/PAUSE-MARCHE/PAUSE” button: the corresponding light stops flashing and drying starts. Only the “DROGEN/SECHAGE” light stays lit. If you have selected the “STARTUITSTEL/D.DIFF.”, the machine begins its countdown.

The drum turns alternately in both directions during drying.

All drying programmes end with a 10 minute cooling phase (light “AFKOELEN/REFROID.” is on).

The “EINDE/FIN”and “FILTER/FILTRE” lights illuminate. The display shows a sta- tic zero and the buzzer sounds to indicate the end of the cycle.

You may remove the laundry after this phase.

Remove or add laundry

It is possible to interrupt the drying cycle at any time in order to remove or add laundry.

Open the door.

Caution! Laundry and drum can be hot.

Remove or add laundry.

Close the door and press “START/PAUSE-MARCHE/PAUSE” button to continue the drying cycle.