Something not working?
Something not working?
If a problem occurs, you can try to solve it yourself following the instructions below. If you call out an engineer when one of the follo- wing problems occurs, or to repair a fault due to incorrect use, the call- out will be charged even if requested within the guarantee period.
Problem | Possible cause | Remedy | |
|
|
| |
| Mains plug disconnected | Plug in mains plug | |
| The | press | |
| button has not been depressed. | button | |
The drier is not working | No programme selected | Select programme | |
|
| ||
Loading door open | Close loading door | ||
properly | |||
|
| ||
Fuse or residual current circuit | Check fuse or residual current circuit | ||
| |||
| breaker in fuse box (domestic | breaker. Faults can be eliminated by | |
| installation) faulty | an electrical engineer | |
|
|
| |
| Wrong programme selected | Select another (time) programme for | |
| the next drying cycle | ||
|
| ||
|
|
| |
| Lint filter blocked | Clean lint filter | |
|
|
| |
| Wrong filling quantity | Observe recommended filling quantity | |
The drying results |
|
| |
|
| ||
are not satisfactory |
|
| |
| Laundry not sufficiently dried |
Deposit on the drum inner surface-
or on the drum ribs
Clean drum inner surface and drum
ribs
25