AEG T37400 operating instructions Long time

		Smoething not working?
Problem	Possible cause	Remedy
The drying cycle	Vented air transport disrupted	Straighten N- air venting hose
		and/or clean air venting ducts
exceptionally takes a
long time	Lint filter blocked	Clean lint filter
The loading door
	Lint filter not installed and/or fil-	Install lint filter and/or lock filter lid
cannot be closed	ter lid not locked in position	in position
The drier ends the dry-
	Too little or too dry laun-	Select time programme or hig-
ing cycle automatically:
		her drying level (for instance
END indicatoris illumi-	dry loaded for selected
		EXTRATROCKEN instead of
nated shortly after pro-	programme
		STARKTROCKEN)
gramme start
The drying cycle excep-	SCHON- button depressed and	Check programme selection: only use
		SCHON -button for laundry quanti-
tionally takes a long	filling quantity too large
		ties up to 3 kg. Clean lint filter.
time. 4,5 hours after
starting the drying cycle:	Filling quantity too large	Reduce filling quantity
END indicator is illumi-
nated - drying cycle is		Pre-dry laundry more thorougly
aborted - programme	Laundry too wet
run indicator flashes

If these operating instructions do not offer sufficient advice to eli- minate a specific fault, please contact our customer service.

23